Bair Hugger Security Systems Manuel de service télécharger pdf (Page 24)

Bair Hugger Model 750 Temperature Management Unit Service Manual

Check the 3M

Bair Hugger

therapy website to ensure you have the most recent version of this document. www.bairhugger.com reorder #202522A

Replacing the Hose

Service frequency

As needed.

Tools/equipment

• Replacement hose

• Phillips screwdriver

• Needle-nose pliers

• Strap wrench (optional)

Method

Detaching Hose

1. Disconnect the temperature management unit from the power source before replacing hose.

2. Unscrew the hose collar.

3. If present, use the Phillips screwdriver to remove the 2 screws that attach the hose to the unit.

4. Slide the hose out of the temperature management unit. e hose will still be attached to the unit by

a cable.

5. Using the needle-nose pliers, carefully detach the cable connector from the header plug located inside

the hose connector ( see Figure 3. Hose replacement).

Figure 3. Hose replacement

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 36 37

Pas de commentaire

Bair Hugger Security Systems Manuel de service Page 24