Bair Hugger Security Systems Manuel de service télécharger pdf (Page 15)

English 202430A

Check the 3M

Bair Hugger

therapy website to ensure you have the most recent version of this document. www.bairhugger.com reorder #202430A

Air Filter Replacement

The air filter is mounted in the bottom of the warming unit

(See Figure 4).

Tools/Equipment

Phillips-head screwdriver

Service Frequency

Every 12 months or 500 hours of use.

Method

1. Disconnect the warming unit from the power source.

2. Remove the M6 x 25 pan-head screw on the bottom of the

unit. The filter should slide out easily.

3. Record the hour meter reading and date on the new air

filter label. The hour meter is located in the lower left

corner of the top warning label (see Figure 4).

4. Slide the new filter into the base of the unit.

5. Replace the M6 x 25 pan-head screw on the bottom of the

unit.

6. Reconnect the warming unit to the power source.

7. Record the hour meter reading and maintenance action

taken in the Maintenance Log section.

Figure 4. Location

of Air Filter and

Hour Meter

Air filter

Hour meter

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 32 33

Pas de commentaire

Bair Hugger Security Systems Manuel de service Page 15